7.TROUBLE SHOOTING
After enter the correct
password and select
AUTO mode, but the
mower still can not start.
And the charging station
is beeping.
During operating, mower
stops cutting enters
standby mode and
beeping.
1. User touch the handle
at backside of mower.
1.Do not touch the handle.
Restart the mower.
1. No power to plug
receptacle or main power
is shut off.
Bad communication
between charging station
and mower.
1. Check the power and
make sure the charger is
connecting well with power
supply and charging
station.
1.The virtual wire fails to
send signals.
2.The virtual wire was
cut off.
1.Check the virtual wire
light on charging station.
wire is
Be sure the virtual
connected to the charging
station well (light in
2. Connect the virtual wire
with wire connectors.
7. TROUBLE SHOOTING
Problem
Display
Solutions
Possible reasons
colorless).
After enter the correct
password and select
AUTO mode, but the
mower still can not start.
2. Water or wet grass
drop on the handle.
2.Dry the handle and
restart the mower.
Mower stops working
and beeping.
1. Mower is lifted from
ground.
2. Someone or object ride
or sit on the mower.
1. Take the mower on level
ground and restart it.
2. Take the object away
from mower and restart it.
Mower stops working
and beeping.
1. Running wheel strike
1. Cutting height is too low
2. Blade strikes hard
objects.
3. Mower is trapped in lawn
1. Adjust the cutting height
to suitable height.
2. Clean the lawn and make
sure it is free from hard objects.
3. Clean the lawn where mower
is trapped or restart the mower
in another place.
Mower stops working
and beeping.
hard objects.
2. The mower is trapped
in lawn.
1. Clean the lawn and make
sure it is free from hard objects.
2. Clean the lawn where mower
is trapped or restart the mower
in another place.
- 16 -
