7.TROUBLE SHOOTING
Problem
Display
Solutions
Possible reasons
Remote control does
not work.
1. The battery is low.
2. Remote control is not
match with robot.
1. Change new batteries.
2. Match the frequency
with mower.
Power nearing natural
end of life.
2. Check whether charger
is well connected.
1.Send the mower to service
station and replace the
battery.
The batteries can not
recharged
1. Grass is extremely
overgrown or very wet,
2. Terrain needs
landscaping repairs.
1. Cut the grass appropriate
height.
2. Fill in all holes, cover or
exclude all exposed roots
in order to smooth the
terrain.
Obstacle along the path.
Mower does not complete
Watch the full operation of
follow virtual wire walking
and confirm no obstacle
is present.
the edge.
Mower does not detect
the charging station
contacts.
The ground before the
charging station isn’t flat.
Reset the charging station
in a flat place.
Confirm the ground before
the charging station is
leveled with the station if
necessary fill area with dirt
Relocate the virtual wire.
1. Replace a new blade.
2. Stop the mower in safety,
use protection gloves to
avoid the risk of cuts on
hands, remove the fold
cause from blade.
3. Start the robot in new place.
1.Damaged cutting blade.
2.Cutting blade flooded by
residues(tapes, ropes,
plastic fragments, etc)
3.The start of mower
occurred with obstacles
being too closed (less than
1m away) or in presence of
unexpected obstacles
(fallen branches, forgotten
objects, etc.)
The mower is very noise.
Height difference between
the
charging station and
lawn surface at the
entrance to charging station.
Virtual wire incorrectly
placed
Mower reached the
charging station when
its contacts are above
The mower behaves in
an anomalous around
flower beds.
the charging sheets.
4. Damaged running motor
5. Grass too high.
4. Get the motor repair or
replace by service station.
5. Increase the cutting height
or use a normal lawn mower.
- 17 -
and level off.
Summary of Contents for TC-158N
Page 22: ...USER MANUAL Robot lawn mower ...