Version: SZ110A-1-02
MODEL: AF110A
Human Flu Thermometer
Instruction manual
Introduction
Thank you for choosing AF110A non-contact
Human flu
infrared thermometer. AF110A is special
design for measurement Human flu forehead
temperature, provide quick and accurate testing.
Build-in environment temperature compensation and
self-detection, without contact, ear-cap, no more ear
canal cross infection.
How it works
Infrared thermometer measure the surface
temperature of human body. The units optical
,
system sense the object s emitted energy with
different wavelength. It is collected and
,
focus onto a detector. The unit s electronics
system translated the information into a
temperature reading which is displayed on
the unit.
Cautions
Infrared thermometer should be protected for
the following:
--EMF (electro-magnetic fields) from arc welders,
induction heaters.
--Thermal shock (cause by large or abrupt ambient
temperature changes allow 30 minutes for
unit to stabilize before use).
--Do not leave the unit on or near objects of high
temperature.
1. When take measurement, point thermometer
toward the forehead to be measured and hold the
trigger key, the closer distance the more precision
will be obtained..
2. Detection distance: 5 to 10 cm with the
Human flu forehead is more accurate.
1. Open battery door and install 2*AAA battery
properly, when pull the trigger and LCD
display battery power and temperature reading
(as figure 2), the reading will hold for 10 seconds.
LCD display:
A. Data(reading) hold icon
B. Scanning icon
C. Indicator lamp light icon
D. Battery power icon
Quick start instruction
(Figure 1)
(Figure 2)
Measurement
trigger
SCAN
Battery door
A
B
C
D
E
F
5 to 10cm
G
3. Not recommended use this unit at direct
sunlight or near a strong wind.
4. When forehead is wetting, please make it dry,
then take measure again.
5. When environment temperature changed,
please keep the unit under this environment
more than 20 minute, then take measure again.
B / S
C / F
5~10c
m
