background image

User Guide

 

P.11

 

Passive mode: 
To arm the Starter Kill: 

 

Press the 

 button on the transmitter. 

OR 

 

Let the Starter Kill arm automatically 1 minute (by default) or 3 minutes (if configured this way) 
after the ignition is turned OFF or once the last door is closed (if the doors are monitored). The 
parking lights will flash once. 

 

The LED on the antenna will flash quickly during the countdown preceding the activation 
of the Starter Kill. 

 

Once the activation countdown expires, the LED will send a series of quick double 
flashes to indicate that the Starter Kill is now armed. 

To disarm the Starter Kill: 

 

Press the 

 button on the transmitter. 

 

The Starter Kill will automatically rearm itself after 1 minute (by default) or 3 minutes (if 
configured this way) if no door is left opened (if the doors are monitored) and the ignition 
is not turned ON

Active Mode: 
To arm the Starter Kill: 

 

Press the 

 button on the transmitter. 

 

The parking lights will flash once. 

 

The LED on the antenna will flash slowly. 

 

If remote door locks are installed, this will also lock the doors and arm the OEM-style 
alarm (if configured). 

To disarm the Starter Kill: 

 

Press the 

 button on the transmitter. 

 

The parking lights will flash twice. 

 

The LED on the antenna will remain OFF

 

If remote door locks are installed, this will also unlock the doors and disarm the OEM-
style alarm (if configured). 

Remote

 

Starter

 

Features

 

Remote

 

Door

 

Locks

 

If your Remote Car Starter was installed with the Remote Door Locks option, you will have the 
convenience of remote keyless entry. 
To LOCK your doors and ARM the system: 

1.

 

Press and hold the 

 button for approx. 1 sec. 

2.

 

The remote will beep once then display the 

 icon to confirm locking of the doors. 

To UNLOCK your doors and DISARM the system: 

1.

 

Press and hold the 

 button for approx. 1 sec. 

2.

 

The remote will beep twice then display the 

 icon to confirm unlocking of the doors. 

Summary of Contents for AS-2471TW-FM





















Reviews: