background image

User Guide

 

P.13

 

Valet

 

Modes

 

When the vehicle is in Valet Mode, the remote starter and alarm functionalities are disabled. If the 
vehicle needs to be serviced, or if you park it indoors, Valet Mode will prevent the engine from 
being remote-started accidentally. 
 
Any of the following features will put the remote car starter into Valet Mode: 
Ignition Valet:
 This feature allows you to set Valet Mode using the ignition key. 
Remote valet: This feature allows you to set Valet Mode using the transmitter. 
 

To put the system into Valet Mode 

Using the KEY (Ignition Valet Mode): 
1.

 

Insert the ignition key into the ignition switch. Within 10 sec., turn the key to the 
IGNITION/RUN and OFF positions until parking lights flash 3 times

2.

 

Turn the ignition OFF

3.

 

The LED on the antenna will stay ON indicating that the vehicle has successfully entered 
Valet mode. 

4.

 

The 

 icon will appear on the LCD remote if the 

 or 

 button is pressed. 

Using the TRANSMITTER (Remote Valet Mode): 
1.

 

Press the 

 and 

 buttons simultaneously until the 

 icon appears on the LCD display. 

2.

 

The LED on the antenna will stay ON indicating that the vehicle has successfully entered 
Valet mode. 

 

To take the system out of Valet Mode 

Using the KEY (Ignition Valet Mode): 
1.

 

Insert the ignition key into the ignition switch. Within 10 sec., turn the key to the 
IGNITION/RUN and OFF positions until parking lights flash twice

2.

 

Turn the ignition OFF

3.

 

The LED on the antenna will switch OFF indicating that the vehicle is now out of Valet mode. 

4.

 

The 

 icon will disappear from the LCD remote if the 

 or 

 button is pressed. 

Using the TRANSMITTER (Remote Valet Mode): 

 

Press the 

 and 

 buttons simultaneously until the 

 icon disappears from the LCD 

display. 

 

The LED on the antenna will switch OFF indicating that the vehicle is now out of Valet mode. 

 
If someone attempted to remote-start the vehicle while in Valet Mode; the parking lights will turn 
ON, then OFF, then will flash twice

Panic

 

Mode

 

Note: Panic mode can only be activated if the horn has been adequately configured by the 
installer.  

In an emergency situation, you can activate panic mode by pressing and holding the 

 OR 

 

button for more than 3 seconds, until the horn starts honking. If the vehicle is under a remote start, 
the engine will shutdown automatically before setting off the horn. You can stop the horn by 
pressing: 

 (this will lock your doors and deactivate panic mode), or 

 (this will unlock your doors and deactivate panic mode). 

Furthermore, the panic mode can be stopped by activating Valet Mode (page-12) 
* Panic Mode will automatically shut down after 30 sec. 

Summary of Contents for AS-2471TW-FM





















Reviews: