― 15 ―
Smart Start, Inc.
IN-HOM S.M.A.R.T. Mobile
User’s Manual
23.
Test Incomplete -
Don’t Inhale
: The unit detected the user
inhaling during test. A retest is required. Wait for the unit to
display “Ready” or “Test Required – Please Blow” and take
another test. This time, do not inhale.
24.
Test Error- Please Retry
: Your unit did not complete the test
successfully. A retest is required. Wait for the unit to display
“Ready” or “Test Required – Please Blow” and take another test.
25.
Too Cold - Plug in Power
: Your unit is too cold for normal
operation and will not allow a test. Plugging in the power supply
will enable internal heaters that can speed up the time required to
reach operating temperature. Please make sure you are using
the device in normal room temperature conditions and allow it to
warm up. Once the device
warms up, it will go to “Ready” or “Test
Required
– Please Blow” and allow a test. Please note that any
skipped tests due to the unit being too cold will be reported as
violations.
26.
Too Hot:
Your unit is too hot for normal operation and will not
allow a test. Allow the unit to cool down to a normal room
temperature. Once the device cools down, it will go to Ready
” or
“Test Required – Please Blow” and allow a test. Please note that
any skipped tests due to the unit being too hot will be reported as
violations.
27.
Re-Test Required in x:xx:xx
: After a failure or violation in a test
window, the IN-HOM S.M.A.R.T. Mobile device will temporarily
prevent a test with this countdown timer. Once the countdown
timer reaches zero (0), the device will return to “Test Required –
Please Blow.”
28.
Please Wait ## sec
: After a failure or violation outside of a test
window, the IN-HOM S.M.A.R.T. Mobile device will temporarily
prevent a test with this countdown timer. After the timer reaches
zero (0), the device will retur
n to “Ready” and you will be able to
provide another test.
29.
Test Error - Tamper Detect
: This means the device did not
detect a human breath sample. Wait for the unit to display
“Ready” or “Test Required – Please Blow” and take another test.
The IN-HOM S.M.A.R.T. Mobile device will detect the use of non-
human breath samples and will require a re-test. Tampering is
also a violation of your program.
