background image

99-00582-20 REV A0

About the 4000i

1

About the 4000i    

The 4000i is a 

Rear Projection

 SMART Board interactive whiteboard cabinet with an integrated 

liquid crystal display (LCD) projector and a 66" (167.6 cm) diagonal interactive screen. 

A mirror system in the cabinet reflects the projected image onto the back of the interactive 
whiteboard screen, eliminating the shadows that may occur in a front projection system. 

You can switch between different projector input sources (host computer, VCR, DVD player and 
guest laptop) with the press of a control panel button.

DViT™ (Digital Vision Touch) technology uses digital cameras to track objects on the interactive 
whiteboard. Each camera recognizes the position of a pen tray tool or your finger on the screen 
and sends this information to the computer for processing. You can perform normal computer 
operations, such as opening and closing applications, scrolling through files and opening your 
browser by touching the screen.

4000i Features

Touch sensitive, rear projection interactive whiteboard that you can use like a standard 
computer. You can write over any application in digital ink using a pen tray pen or your finger  
and save your digital ink notes as a Notebook™ software file for reference and distribution.

Integrated projectiondesign® F20 projector with short-throw lens.

Audio system.

Pen tray (including four pens and an eraser), a wireless keyboard and a wireless mouse.

Control panel with projector, volume and source switching controls. The control panel also 
provides button-press access to Notebook software and Floating Tools.

Connection panel at the rear of the cabinet that allows you to connect a network cable, printer 
and room audio system.

Locking front doors for enhanced security.

Minimal floor space requirements: the 4000i fits through most standard doorways for room-to-
room mobility.

The projectiondesign F20 Projector

The F20 projector has SXGA+ resolution (1400 × 1050 pixels) and is adapted for use in the 4000i. 

 

NOTE:

 See page 14 for information on adjusting the projected image.

Summary of Contents for SMART Board 4000i

















































Reviews: