40
HOW TO USE
ENGLISH
CAUTION
Use two hands when removing or
y
assembling the Fresh Zone compartment.
Open both refrigerator doors completely
y
and empty and remove the Door-in-
Door case and bins before removing or
assembling the Fresh Zone compartment.
Removing/Assembling the
Fresh Zone Compartment
(Model Name : LNXC23766*)
Removing the Fresh Zone
Compartment
1
Open the refrigerator doors all the way.
Empty and remove the Door-in-Door
case and bins. Clear off and remove all
refrigerator shelves. Remove all contents
from the Fresh Zone cover and drawers.
2
Lift the Fresh Zone drawers with both
hands and gently pull them toward you.
3
Grabbing the back of the Fresh Zone
compartment with one hand, tilt the
compartment up, and then remove it while
tilted.
Assembling the Fresh Zone
Compartment
1
Hold the Fresh Zone compartment at an
angle and place it into the refrigerator
compartment.
2
Lift the Fresh Zone compartment to a
horizontal position, lower it to its original
position, and gently push it back into place.
3
If there is a gap behind the drawer, as
seen below, slightly lift the Fresh Zone
compartment and push it backward.