4
Battery
Instruction
The instruction shows how to charge and maintain the battery, some safety notices and the specification.
Please use the battery properly according to this instruction to prolong the battery life and its performance.
4.1 Battery Parameters
Name
Parameter
Name
Parameter
Name
Parameter
Type
Li-ion battery
Working Temperature
0
℃
-
35
℃
Store Time
（
-
10
℃
-
40
℃）
3 months (full charge)
Charging Time
5-6 hours
Charging Temperature
0
℃
-
35
℃
Initial Volume
10.4Ah or Upgrade to
12.8Ah
Voltage
36V
Max Charging Voltage
42V
Max Charging Current
2A
4.2 Battery Safety
Do not continue to use the battery when the following conditions occur:
The battery of the electric scooter should be used only with local law. Only for professionals to disassemble and maintain
the battery.
Odor or excessive heat; leak any substance; do not touch anything leaking from the battery.
Do not let children and animals touch the battery. Must unplug the charger before installing the battery or riding.
In the case of charging, it is very dangerous to do anything related to electric vehicles.
If you want the electric scooter to run most efficiently, the battery must be charged and used within the temperature range
indicated in the battery specifications.
Lithium batteries are considered dangerous and require local law to allow transportation.
The battery contains dangerous substances. Please do not open the battery . Do not insert anything into the battery. It is
forbidden to charge a lithium battery that has been over-discharged. A battery that has been over-discharged has a
safety hazard and can only be scrapped.
Tip: When the internal temperature of the battery exceeds 45 °C, the battery is protected.
Do not charge the battery at high temperature (45 ° C) or Charge the battery in a high temperature (40 ° C) environment.
Only use the original charging equipment to charge the electric scooter.
4.3 Charging step
●
Open the charging port cover, Make sure the charging port is clean and dry.
●
Connect the charger with the battery and the other end with power(100V-240V;50/60Hz), make sure the charging indicator is
on.
●
When the charger indicator is red, it will charge normally. Otherwise, please check if the plug is connected properly.
●
When the charger indicator is green, charging is complete.
After charging, cover the dustproof rubber to prevent something from entering the charging port and causing
battery failure.
-
13
-
-
14
-
