When you have chosen your preferred location, peel the white backing off the
3M sticker to expose the adhesive and stick to the top of the camera bracket.
Peel the red tab off and apply the camera to your location. Make sure all the
base is in contact with your surface.
Press firmly to allow the surface and adhesive to bond.
Mounting the Camera
First chose a suitable place to mount the camera, we recommend in the
middle of your dashboard or top middle area of your windscreen for
maximum viewing ability. The same applies for the rear window.
Before mounting the camera, you can adjust the viewing angle by loosening
the rear screw on each side of the camera. Tighten after you have achieved
required viewing angle. Remove the lens cover.
