Important information
4
l
Do not stand (or allow children to stand) on a chair to
touch the surface of the display. Rather, adjust the stand
so the display is at the proper height.
l
Ensure that any cables extending across the floor to the
stand are properly bundled and marked to avoid a trip
hazard.
l
Unplug the power cord before cleaning the stand. Use
only a dry or slightly dampened cloth to clean the stand.
l
Do not allow children to clean or maintain the stand
without supervision.
l
Only use attachments/accessories specified by the
manufacturer.
l
Unplug the power cord before connecting and
disconnecting the control panel.
l
Unplug the power cord if the stand malfunctions.
l
To reduce the risk of fire or electric shock, do not expose
the stand to rain or moisture.
l
Do not use the stand if the power cord is damaged.
Replace a damaged power cord only with a new cord
and power bar provided by SMART Technologies or a
qualified service technician.
l
Do not modify or make changes to the control unit or
hand switches.
l
Do not open the control box. There is danger of electric
shock.
l
Allow only qualified service technicians to service the
stand. Allowing anyone else to service the stand will void
the warranty/guarantee.
l
Refer all servicing to qualified service personnel.
Servicing is required when the stand has been damaged
in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the stand, the stand has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
l
Use only original accessories and replacement parts.
Using other accessories or parts will void the
warranty/guarantee.
l
Make sure the stand’s power cord is easily accessible at
all times.
CAUTION
l
Operate the stand only indoors.
l
Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the
point where they exit from the stand.
l
Use only a power extension cord that is rated for the
stand’s electrical load.
l
Do not exceed the duty cycle written on the product label.
IMPORTANT
l
Keep these instructions.
l
Make sure an electrical socket is near the stand and
remains easily accessible during use.
l
Plug the stand into its own electrical outlet for best
operation.
l
The stand is intended to be used by a trained operator in
a commercial setting. It is not intended to be used in an
area where children or people with disabilities are not
supervised.
l
When operating the stand, you must be familiar with the
entrapment hazard of the stand, the mounted display,
and of mounted accessories. In some cases, there can
be less than 12" (30.5 cm) of clearance between the
bottom of the display and the stand’s base. This can
cause a person to be pinned and injured. Installed
accessories, such as the laptop shelf, can also cause
people to be pinned between the stand and fixed objects
or furniture. Those who operate the stand must ensure
that they and others stay clear of entrapment locations
when raising and lowering the stand.
Product labels
