background image

10

AFT660 Afterburner & AFT660PnP Digital Plug 'N Play

SECTION 7

Introduction

The Afterburner Digital Plug N’ Play is a digital player
interface port compatible with DTS-6, DTS-6D, Dolby
DA-20, and Sony SDDS digital players.   The AFTPnP
has 4 sets of ports located on the front side that each
interface with a specific brand of player to allow for
quick connect and disconnect of a mobile digital
system.  Additionally, the interface is integrated with
the AFT660 Afterburner to control excessively loud
sound that has been a problem with digital soundtracks
(Please see the Afterburner AFT660 manual for further
details).

Both 6 channel audio and format control signals are
routed through the system and out through a 25 pin D-
Type subminiature connector that is pin to pin compat-
ible with SMART MOD2 and MOD6 processors.  An
additional D-type connector is provided for extra signals
such as mute, left extra and right extra (for 8 channel
systems), and mono surround.  Jumpers are provided for
hard selecting of SR or A-type optical tracks.

The Afterburner Breakout board cannot be used with the
Afterburner Plug 'N Play.

For DTS-6D and DA-20 roll around rack assemblies,
SMART offers optional Plug N' Play Rover Panels for
easy front mounted connect and disconnect.

DA-20: Use SMART Part # PNPROVERDA
DTS-6D: Use SMART Part # PNPROVERDT

Specific Digital Player Features

DTS-6

Audio Signals: Left, Center, Right, Left Surround, Right
Surround, and Subwoofer.

Control Signals: Digital and Optical (can be applied to
SR or A when used with MOD6, or SR/A when used
with MOD2).

EXTRA Signals: MONOSURR, PROJ1, PROJ2, and GO.

DTS-6D

Audio Signals: Left, Center, Right, Left Surround, Right
Surround, and Subwoofer.

Control Signals: SR, A, Digital, Music, and  Mono.

EXTRA Signals: MONOSURR, PROJ1MOTORA/B,
PROJ1DOUSERA/B, PROJ2MOTORA/B,
PROJ2DOUSERA/B, LEFT EXTRA, and RIGHT EXTRA.

Jumpers are provided on the rear of the AFTPnP for
utilizing the FORCE SR and FORCE A features of the
DTS-6D.

Dolby DA-20

Audio Signals: Left, Center, Right, Left Surround, Right
Surround, and Subwoofer.

Control Signals: Digital and SR.

EXTRA Signals: None.

The subwoofer signal on the DA-20 is amplified 10dB
before being processed by the Afterburner.

Installation and Service Manual

AFT660PnP Digital Plug 'N Play

For Digital Systems

SMART DTS-6D Rover Panel

Summary of Contents for AFT660














Reviews: