IMPORTANT INFORMATION
ii
smarttech.com/kb/170446
l
To prevent personal injury, do not attempt to mount or carry the interactive flat panel using
your own strength. Instead, use a lifting device with the included attachable eyebolts. The
eyebolts are not post-installation hardware.
l
Use only VESA®-approved mounting hardware.
l
Disconnect all power cables for your interactive flat panel from the wall outlet and seek
assistance from qualified service personnel when any of the following occurs:
o
The power cable or plug is damaged
o
Liquid is spilled into the interactive flat panel
o
Objects fall into the interactive flat panel
o
The interactive flat panel is dropped
o
Structural damage such as cracking occurs
o
The interactive flat panel behaves unexpectedly when you follow operating
instructions
CAUTION
l
Do not install or remove the I/O extension module or an OPS computer while the interactive
flat panel is turned on.
l
Before you clean your SMART product, shut down or disconnect the computer. Otherwise,
you may scramble the desktop icons or inadvertently activate applications when you wipe
the screen.
l
Avoid setting up and using the SMART product in an area with excessive levels of dust,
humidity and smoke.
l
Make sure an electrical socket is near your SMART product and remains easily accessible
during use.
l
The external power supply needs to meet the Limited Power Source (LPS) requirements of
CSA/UL/IEC/EN 60950-1, when required.
