CHAPTER 6
MAINTAINING YOUR INTERACTIVE FLAT PANEL
49
smarttech.com/kb/170446
2. Use an interactive flat panel pen to press the red targets as they appear. Hold the tip of the
pen at the center of each target, and then lift the pen. When you lift the pen, the target moves
to the next orientation point.
IMPORTANT
Hold the pen perpendicular to the screen.
3. Continue until you’ve pressed all the targets.
The orientation window closes.
4. If this doesn’t correct inaccurate touch, calibrate the interactive flat panel (see
Replacing batteries in the remote control
The remote control requires two 1.5V AAA batteries.
WARNING
To reduce the risk associated with leaking batteries:
l
use only AAA type batteries
l
do not mix used and new batteries
l
orient the battery’s plus (+) and minus (-) terminals according to the markings found on the
remote control
l
do not leave the batteries in the remote control for an extended period
l
do not heat, disassemble, short or recharge the batteries, or expose them to fire or high
temperature
l
avoid eye and skin contact if batteries have leaked
l
dispose of exhausted batteries and product components in accordance with applicable
regulations
To replace batteries in the remote control
1. Press the tab on the underside of the remote control, and then open the cover.
2. Remove the existing batteries.
3. Insert two new 1.5V AAA batteries in the remote control.
4. Replace the cover.
