CHAPTER 6
MAINTAINING YOUR INTERACTIVE FLAT PANEL
53
smarttech.com/kb/170446
Checking the interactive flat panel installation
Inspect your interactive flat panel installation frequently to ensure that it remains securely installed.
l
Check the mounting location for signs of damage or weakness that can occur over time.
l
Check for loose screws, gaps, distortions or other issues that could occur with the mounting
apparatus.
If you find an issue, refer to a professional installer.
Removing your interactive flat panel
To safely remove your interactive flat panel, use four or more professional installers.
WARNING
l
Do not attempt to move the interactive flat panel using your own strength. The interactive
flat panel is very heavy.
l
Do not move the interactive flat panel by connecting a rope or wire to the handles on the
back. The interactive flat panel can fall and cause personal injury and product damage.
IMPORTANT
Follow the instructions included with the floor stand or mounting apparatus.
To remove your interactive flat panel
1. Turn off your interactive flat panel and unplug the power cable from the wall outlet.
2. Remove all accessible cables and connectors.
3. Attach the eyebolts for your lifting equipment. For more information, see
4. Lift your interactive flat panel from its mounting location.
CAUTION
o
Do not leave the interactive flat panel face up, face down or upside down for an
extended period of time, because it could cause permanent damage to the screen.
o
Do not place the interactive flat panel on a sloping or unstable cart, stand or table,
because the interactive flat panel could fall, resulting in injury and severe product
damage.
