APPENDIX A
USING THE ON-SCREEN DISPLAY MENU
74
smarttech.com/kb/170446
Option
Values
Function
Notes (if any)
Lync® ROOM RESET
[N/A]
Resets options in all menus to their
default values (for a
SMART Room System™ for
Microsoft® Lync)
FACTORY RESET
[N/A]
Resets options in all menus to their
default values
SMART Board 8084i-G4-SMP
interactive flat panel on-screen display menu
Option
Values
Function
Notes (if any)
PICTURE
Picture Mode
Picture Mode
Vivid
Standard
Ambient
Expert1
Expert2
Sets the picture mode
The other options in the
Picture
Mode menu change depending on
which value you select for this
option.
The options documented in this
table are those that appear when
you select Vivid, Standard or
Ambient in this option.
Alternatively, you can press the
PSM button on the remote control
to access this option.
In Bright
1–100
Sets the image brightness for
brightly lit rooms
You can modify this option only if
you select Ambient in
Picture
Mode.
The value of this menu option can’t
be less than the value of
In Dark.
In Dark
0–99
Sets the image brightness for dimly
lit rooms
You can modify this option only if
you select Ambient in
Picture
Mode.
The value of this menu option can’t
be more than the value of
In Bright.
Light Threshold
[Number]
Sets the light threshold
You can modify this option only if
you select Ambient in
Picture
Mode.
Sensing Lux
[N/A]
Shows the current illuminance level
of the room (in lux)
This option only provides
information. You’re unable to
modify it.
Backlight
0–100
Sets the backlight level of the
image
