When the ignition is restarted, the last set-
ting of Lane Keeping Assist is retained.
Cruise control and limiter
Please note
G
WARNING
If you call up the stored speed and this
differs from your current speed, the vehi-
cle will accelerate. If you do not know the
stored speed, the vehicle can accelerate
unexpectedly. There is a risk of an acci-
dent.
Before you call up the stored speed, pay
attention to traffic conditions. If you do
not know the stored speed, store the
desired speed again.
Cruise control is used in order to drive at a
constant speed for a prolonged period. The
limiter helps to avoid exceeding a stored
speed.
The driver is responsible for driving the
vehicle in a safe manner, controlling the
vehicle speed and braking in good time.
If there is a change of drivers, inform the
new driver of the speed stored.
The two driver assist systems require the
following:
R
favourable weather and good visibility
R
good road and traffic conditions
The cruise control and limiter systems do
not brake automatically.
R
reduce the vehicle speed by applying the
brakes
Speed regulation is cancelled when the fol-
lowing occur:
R
braking (including the parking brake)
R
ESP
®
intervention
On downhill gradients or when accelerating
briefly, cruise control may interrupt speed
regulation. Afterwards, the set speed is
applied again.
On downhill slopes, the limiter can exceed
the set speed. In this case, the stored speed
flashes in the display and a warning tone
sounds.
Cruise control is ready for use at speeds
above 30 km/h. With the limiter, speeds of
30 km/h and over can be set as the maxi-
mum speed.
Cruise control and limiter cannot be activa-
ted at the same time.
Activating cruise control or the lim-
iter
X
Press top (cruise control) or bottom (lim-
iter) of button
:
.
The
¯
(cruise control) or
È
(lim-
iter) button appears in the instrument
cluster display.
Storing the current speed
X
Press the
®
button
;
.
Limiter:
the stored speed appears next to
the
È
symbol in the instrument clus-
ter display.
Cruise control:
the stored speed appears
next to the
¯
symbol in the instru-
ment cluster display.
Adjusting the stored speed
X
Press the
®
button
;
or the
g
button
until the desired speed is reached.
Interrupting cruise control and the
limiter
X
Press the
±
button
?
.
The stored speed can be accessed again
later.
Cruise control and limiter
79
>> Driving
.
Z
