CHAPTER 3
CONNECTING A GUEST COMPUTER
14
Connecting a computer to the interactive flat
panel
NOTE
For the best experience with SMART kapp iQ, connect the room computer to the AM30
appliance.
A SMART kapp iQ Pro interactive flat panel can have one or three computer connectors,
depending on the model. Using USB and HDMI or DisplayPort cables, you can connect room
computers, guest laptops or video sources (such as Blu-ray™ players) to these connectors. By
installing these cables, you make use of connectors that might not be accessible when the
interactive flat panel is wall-mounted. You can then run the cables across floors or behind walls to
the conference table.
WARNING
Ensure that any cables that cross the floor to the board are properly bundled and marked to
avoid a trip hazard.
If you want to use the interactive flat panel's touch features, and use a pen to draw and write,
complete these steps:
l
Connect a computer to the interactive flat panel's computer connectors using USB and HDMI
cables.
l
Download and install SMART Product Drivers and SMART Ink on your computer. See
smarttech.com/us/Support/Support/DSoftware
.
NOTE
Devices connected to the interactive flat panel's connectors are controlled by the front control
panel. See Page 13.
Summary of Contents for KAPP iQ 75
