CHAPTER 2
USING YOUR CAPTURE BOARD
7
smarttech.com/kb/170769
Device type
Requirements
Connection options
Android
l
Android 4.1 (Jelly Bean) or later
operating system
l
50 MB of storage (internal or
SD card)
l
1024 MB of RAM
l
720p or better screen resolution
l
Bluetooth 2.1 + EDR
1
l
NFC (recommended)
l
3 megapixel or better rear-facing
camera (recommended)
l
Scan the capture board’s unique
QR code
l
Tap the capture board’s NFC tag
NOTE
Most of the SMART kapp app’s features are identical across iOS operating system software and
Android operating systems. However, some features are available for only one of these
operating systems. The remainder of the user’s guide highlights these features with the following
icons:
iOS operating system software
Android operating systems
When you first connect a mobile device, you’re prompted to install an app. You can then use the
app to share notes you have written on your capture board with others.
About QR codes and NFC
As noted in the previous section, you can connect your mobile device to your capture board by
scanning the capture board’s QR code or by tapping the capture board’s NFC tag.
l
A QR code is a type of bar code. If your mobile device has a rear-facing camera and a
QR code scanning app, you can scan QR codes like the one on your capture board. Your
mobile device then executes the QR codes’ commands. Typically, QR codes’ commands
display messages or open web pages.
1
Compatible with Bluetooth 3.0 and dual-mode Bluetooth 4.0