i
smarttech.com/kb/170769
Important information
WARNING
l
Your SMART product includes instructions for installation on metal and wood stud walls and
certain masonry wall types only. A SMART hardware kit is available for these types of
installation (Part No. 1024563). In the event that you need to install your SMART product on
reinforced concrete walls, walls with plaster lath finishing or other types of walls, refer to
your local building authority for instructions, recommendations and safe work practices.
l
Do not open or disassemble the SMART product. You risk electrical shock from the high
voltage inside the casing. Opening the casing also voids your warranty.
l
Ensure that any cables extending across the floor to your SMART product are properly
bundled and marked to avoid a trip hazard.
l
Ensure your installation complies with local building and electrical codes.
l
Failure to follow the installation instructions shipped with your SMART product could result in
personal injury and product damage which may not be covered by your warranty.
l
To reduce the risk of fire or electric shock, do not expose the SMART product to rain or
moisture.
l
Use SMART supplied mounting hardware or hardware that is designed to properly support
the weight of your product.
l
Use the power cable provided with this product. If a power cable is not supplied with this
product, please contact your supplier. Use only power cables that match the AC voltage of
the power outlet and that comply with your country’s safety standards.
l
Do not place any heavy objects on the power cable. Damage to the cable could cause
shock, fire or product damage which may not be covered by your warranty.
