CHAPTER 2
USING YOUR CAPTURE BOARD
21
smarttech.com/kb/170769
3. If you’re using an Apple mobile device, press Edit.
OR
If you’re using an Android mobile device, press Menu , and then select Select.
4. Select the session you want to delete.
5. Press Delete
, and then press OK.
Saving snapshots of your notes to a USB drive
If you don’t have access to a mobile device or would prefer to save snapshots of your notes using
another means, you can save PDF snapshots to a FAT-formatted USB drive.
To save a snapshot
1. Connect the USB drive to the USB 2.0 Type-A receptacle on the side of your capture board.
2. Press Capture
or USB
on your capture board.
The capture board saves a snapshot of your notes to the USB drive.
3. Disconnect the USB drive from your capture board when you’re done saving snapshots.
Accessing capture board diagnostic information
The SMART kapp app provides the following information about the last capture board you
connected your mobile device to that might be useful when contacting SMART for support.
l
The date when you last connected to the capture board
l
Capture board ID
l
Dimensions
l
Serial number
l
Model number
l
Firmware version
To access diagnostic information
Tap Settings
> Advanced > Diagnostic Information.
The diagnostic information appears.
