CHAPTER 3
USING THE INTERACTIVE WHITEBOARD
13
smarttech.com/kb/170410
Understanding the Select button’s status light
The Select button’s light also indicates the status of the interactive whiteboard. The Select button’s
light is solid white when the system is working properly.
The following table shows the Select button’s normal states. If the light’s behavior doesn’t match a
state listed here, see
Select light state
Meaning
Flashing white
The interactive whiteboard is receiving power and is
communicating successfully with the computer’s USB HID
driver, but SMART Product Drivers isn’t installed.
NOTE
In HID mode, interactive whiteboard tools such as the pens
are unavailable, but you can move the mouse pointer and
perform mouse functions by touching the interactive surface.
The Right-Click button on the pen tray might work,
depending on the version of operating system you’re using.
Neither the Keyboard nor the Orient button works in HID
mode.
Solid white
The interactive whiteboard is receiving power and is
communicating successfully with SMART Product Drivers.
When you press another pen tray button, the Select button’s
light turns off and the light on the button you pressed turns on.
Solid amber
The controller module is in service mode or the firmware is
being updated.
Summary of Contents for M680
