Dual mount motion and occupancy sensor
User manual
Rev. 1 del 10.11.2022
Pag. 7/9
Ceiling mounting
The recommended position for ceiling mounting is at a height of 2.8m (9.19ft)
from the floor. At this height, the optimum detection range is up to 5m (16.41ft)
with coverage range of 360 degrees (FIGURE 5b).
Settings
Coverage range adjustments
Two types of lens cover are provided for the detector. Wall-lens cover (FIGURE 6a) is to be used when the
detector is wall-mounted. Ceiling-lens cover (FIGURE 6b) is to be used when the detector is ceiling-
mounted. The coverage range adjustment is only applicable to ceiling-lens cover; choose correct lens
cover before mounting.
The shading cap is comprised of 12 segments for limiting the detection coverage, and each segment covers
a detection angle of 30 degrees (FIGURE 6c). Follow the grooves on the cap, cut the cap to a suitable size
and place it onto the ceiling-lens cover (FIGURE 6d). The remaining segments are used for blanking off a
detection area not required.
FIGURE 6A
FIGURE 6C
FIGURE 6D
