3.2
How to enter settings
3.3
Add Passcode
Press the “Program” button and the
screen will be activated.
• To end, press the “Program” button at any time.
• To finish with Settings, press the “Program” button again to quit.
• Settings will automatically shut down if inactive for more than 30 seconds.
Press the “Program” button and the screen will be activated. The setting page is as
shown below.
Input 2
Add Passcode
Mode
Number
Delete Passcode
Check Passcode ( On Model PGD718)
Bluetooth Switch ( On Model PGD728)
1
Input a new passcode of 6~8 digits. Then press “ok” .For example
:
Input 1, input
2, input 3, input 4, input 5, input 6,then press “OK” .
3
Press “1” to enter Add passcode
mode.
2
Input your passcode
again, press “OK”
4
Input 1
Input 3
Input 6
Input 4
Input 5
OK
Alarm Sensitivity
OK Button
OK Button
PROGRAM
PROGRAM
12