• If there is no passcode preset, the
delete passcode mode will be invalid.
The default passcode will not be shown
on the display key pad. You can add a
new passcode to override the default
one.
• If there is only one set of passcode
preset, the delete passcode mode will
also be invalid. For example, there is
only one set of passcode (1-3-5-7-9-0).
When you hold down the OK button,
there will be an error message. The
smart lock will beep twice.
Press to switch
Confirm deletion
No passcode preset
Error message
Press to delete.
Press to end.
Hold down the
OK button
Note: There are two situations that users could not delete passcode.
3.5
Check Passcode ( On Model PGD718) / Bluetooth Switch ( On Model
PGD728)
Press the “Program” button and the
screen will be activated.
1
Press “3” to enter check passcode
mode.
2
Passcode will be shown on the
screen in sequence (from left to
right & up to down top to bottom).
For example, the passcode
s h o w n o n t h e s c r e e n i s
1-3-5-7-9-0. Every time you touch
the screen, it will switch to the
next set of passcode.
Check passcode mode
( on Model PGD718)
Press any digit to switch
to next set of numbers.
Press once to return to
setting page.
14