Section 5 Safety Precautions
Rotate the inside thumbturn as below.
Under Auto Lock mode, the smart lock will
automatically relock the door 30 seconds
after unlocking. Alternatively you can press
the OK button to lock the door.
Please read this carefully for your own safety!
4.2
Unlock & Lock from indoor
4.3
Lock from outdoor
Automatic lock
Read all the instructions carefully. Remind all family members of the safety precautions.
Do not attempt to disassemble the unit by yourself. It can cause product damage
and self-injury.
Do not use an inappropriate tool that can cause damage or malfunction of the
product.
Make sure the Door is securely locked whenever you leave your house in order to
prevent unauthorized entry.
Please keep your passcode safely. Restrict access to the back panel of your
smart lock and regularly check your settings to ensure passcodes have not been
altered without your knowledge.
Dispose of used batteries according to local laws and regulations. DO NOT BURN.
Use warm water and mild dish soap to properly clean the display keypad of built-up dirt, oils,
and other contaminates.Follow the general rules below:
• Do rinse the touchscreen with warm water prior to the cleaning process.
• Do use the application of soap with a damp, lukewarm cloth
• Don't use abrasives, high alkaline cleaners, or gasoline
• Don't leave cleaning detergent on the display keypad for long periods; wash immedi-
ately.
• Don't apply cleaners in direct sunlight or at elevated temperatures.
• Don't use scrapers, squeegees or razors.
To clean the bolt, you could use a mild dish soap and warm water. It may help improv-
ing the performance of the lock.
Note:
Once the latch is blocked and cannot
lock the door smoothly, an alert sound will
be heard, your PIN Genie Lock will auto lock
your door in 30 seconds. The above steps
will repeat for 3 times then stop. with the
above steps and then stop.
19
When the door is open the OK button
is flashing, press the OK button to lock
the door
.