background image

WARNINGS AND CAUTIONS:

CAUTION:

CAUTION

CAUTION

RISK OF ELECTRIC SHOCK
         DO NOT OPEN

 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
                  DO NOT REMOVE COVER(OR BACK).
                NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to 
alert the user to the presence of uninsulated "dangerous voltage" within the product's 
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to 
persons.

The exclamation point within an equilateral triangle is intended to alert the user to the 
presence of important operating and maintenance (servicing) instructions in the 
literature accompanying the product.

Should  any liquid or solid object fall into the cabinet, 
unplug the unit and have it checked by the qualified 
personnel before operating it any further.

Unplug the unit from the wall oulet if it is not going to 
be used for several days or more. To disconnect the 
cord, pull it out by the plug. Never pull the cord itself.

Allow adequate air circulation to prevent internal heat 
build-up. Do not place the unit on surfaces (rugs, 
blankets, etc.) or near materials(curtains, draperies) 
that may block the ventilation holes.

Height and vertical linearity controls located at the 
rear panel are for special adjustments by qualified 
personnel only.

Do not install the unit in an extremely hot or humid 
place or in a place subject to  excessive dust,  
mechanical vibration. 

The unit  is not designed to be waterproof.
Exposure to rain or water may damage the unit.

Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use strong 
solvents such as thinner or benzine as they might 
damage the finish of the unit.

Retain the original carton and packing materials for 
safe transport of this unit in the future.

Safety -----------------------------------------     Installation -----------------------------------

Cleaning --------------------------------------

PRECAUTIONS

- 2 -

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT 
TO RAIN OR MOISTURE.  DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE 
VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.

Summary of Contents for STM-150




























Reviews: