background image

MOTION SETUP

This monitor has a motion detection function to support automatic switching from one of the 
cameras to the other camera with motion. 
Motion detection is available on both camera inputs.

The Motion Sensitivity and other options for motion detection can be adjusted in this setup 
menu. 

MOTION ENABLE and SENSITIVITY options can be adjusted individually on each camera.

CAMERA

This menu is used to select the camera for adjustment of motion detection options.

MOTION ENABLE

This option is used to activate or deactivate the motion detection function.

·

    "ON" : Motion detection of selected camera is enabled.

·

"OFF" : Motion detection of selected camera is disabled.

SENSITIVITY

Use SENSITIVITY to adjust the sensitivity of motion detection.
To increase (decrease) the motion detection sensitivity of the camera, increase (decrease) the 
sensitivity value.

CAPTURE TIME

CAPTURE TIME is the interval that the motion detection is processed.
When it is set to 5 SEC, the motion detection is processed at every five seconds.
This means that the minimum switching interval from the camera to the other camera is 5 
seconds when this monitor is operated in MODE 1.
It supports up to 99 seconds.

DWELL TIME

If there is a motion in the field of view of the CA2, the main screen switches to the CA2 image 
for a length of time set in the DWELL TIME setup menu and then returns to the previous screen 
mode. DWELL TIME is the time that the motion detected camera is displayed on the screen. 
It supports up to 99 seconds.

MOTION TIME

This option is used to set when the motion detection function is active. The time represented by 
the upper line is the start of motion detection and the lower line represents the end of motion 
detection time period.
The motion detection function only works during MOTION TIME.
If the user want to use motion detection all the time, adjust the time of lower line sooner than the 
time of upper line. 

13

MOTION SET

CAMERA

CA1

MOTION ENABLE

ON

SENSITIVITY

10

CAPTURE TIME

05 SEC

DWELL TIME 

05 SEC

MOTION TIME                   18:00:00-

                                       

    

 06:00:00 

Summary of Contents for STM-200























Reviews: