Page14
Steam press Instruction Manual
PANTS:
a. Place the pressing Cushion under the waistband and press.
b. Reposition the waistband and continue around the pants until the entire waistband is pressed.
c. To press the inseam, place the Pressing Cushion under the area to be pressed. Press the entire inseam and repeat for the other leg.
d. Press the front and back pleats using the same method. Fold one leg along the creased line. Place it on the Ironing Board so that the seams will
not be pressed. Press the crease.
PLEATED SKIRTS:
a. Place the Pressing Cushion under the waistband and press.
b. Reposition the waistband and continue around the skirt until the entire waistband is pressed.
c. Place the pleated area on the Ironing Board. Fold the pleats carefully and press.
d. Continue with each pleated area until the garment is completed.
OTHER ITEMS:
a.
EMBROIDERY
should be placed FACE DOWN on the Ironing Board to reduce wear and prevent damage to delicate work.
b.
CURTAINS
may be pressed running them from one end of the Ironing Board to the other and pressing in sections until complete.
c.
DRESSES
with special needs should refer to the above sections on pleats, shirts (bodices), etc., for proper use of the Pressing Cushion.
IMPORTANT NOTE:
Many types of clothing are intricate and unique to their owner. You may have to experiment with the best way to press
challenging garments. remember, if you put in a crease you did not intend, you can remove it just as simply with one of the
methods contained in these instructions.
Summary of Contents for ST-X500
Page 18: ......
