©
2017 SMARTfit, Inc. • www.smartfitinc
.com
13
3.
Use the up and down arrow keys to select the number of wireless targets in your
system. Then press the ENTER button to cycle to the next option.
4.
Use the up and down arrow keys to select the RF Channel, which should match the
channel of each wireless target. The user must press the enter key to navigate through
each system setting option. Remember, the CPU settings must match with the desired
targets for a successful initialization.
Next, the system must be turned off and the user should wait 10 seconds before turning the CPU
back on.
See Chapter 5 if the user is interested in adding or subtracting pods.
Types of Configurations
1.
“No Panel” configuration is used for
operating either wired or wireless pods.
2.
“Single 9” is a system incorporating one 92” X 46” station with 9 targets
3.
“Mini 5” and “Mini 9” are
systems
incorporating one 46” X 46” station with 5 or 9 targets
.