background image

User Manual

for the

 SFT SmartClient Series

covering

FLEXiON

™universal Thin Client

NETiON

™dedicated OVD Thin Client

2/2016, Version 8.1.6xx

Press <F9> to display Manual Index

SmartFLeX Technology

http://www.smartflextech.com

This Manual and all accompanying software and documentation are copyrighted and all rights are reserved. This product, including 
software and documentation, may not in whole or in part, be copied, photocopied, translated or reduced to any electronic or 

machine-readable form without prior written consent except for copies retained by the purchaser for backup purposes.

NO WARRANTY OR REPRESENTATION, EITHER EXPRESSED OR IMPLIED, IS MADE WITH RESPECT TO THIS DOCUMENTATION, IN 

QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. AS A RESULT, THE DOCUMENTATION IS 
LICENSED „AS IS“, AND YOU, THE LICENSEE, ARE ASSUMING THE ENTIRE RISK AS TO THEIR QUALITY AND PERFORMANCE. 

SmartFLeX Technology RESERVES THE RIGHT TO REVISE THIS MANUAL AND ANY ACCOMPANYING SOFTWARE AND 
DOCUMENTATION AND TO MAKE CHANGES IN THE CONTENT WITHOUT OBLIGATION TO NOTIFY ANY PERSON OR ORGANIZATION OF 

THE REVISION OR CHANGE.

IN NO EVENT WILL SmartFLeX Technology BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

ARISING OUT OF THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGES. IN PARTICULAR, SmartFLeX Technology SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA 

STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, OR RECOVERING SUCH HARDWARE, 
SOFTWARE, OR DATA.

Copyright © SmartFLeX Technology, Inc., SmartClient Manual, Rev. 02/22/16

Page: 1 of 19

Summary of Contents for FLEXiON




















Reviews: