Assembling your smartGyro Baggio 8:
smartgyro.es
28
Baggio 8- Manual
1. Install the brakes to correct position with the Hex Wrench M5
2. Install the handlebars, pay attention to the installation direction.
3. Hold the scooter upright,-
to ensure that the lock will
not affected,please keep the
folding-spanner (The blue
part of the image)
at the bottom. Pull the
folding-spanner to the
top,then te scooter is
completely locked
4. Install the handlebar to the
standpipe. vertical.
5. Use the Hex Wrench M3 to lock the screws
M3X4 on both sides of the standpipe as below:
Summary of Contents for Baggio 8
