20 •
ENGLISH
MEMORY FUNCTION
Recalling Measurements in Memory
This monitor stores and recalls up to 60 measurements
per memory bank, 120 total, plus an average of the last
three measurements in each bank. These measurements
can be shared with your physician or trained healthcare
professional.
1. When the unit is off, press and release the
MEM
button. The display will show the last memory bank
used, U1 or U2, and the number of measurements
in that bank, Fig 1. Press the
START
button if you
wish to select a different memory bank.
2. Press the
MEM
button again to review the saved
measurements. The first reading displayed is
the average of the last three measurements in
that bank, Fig 2. The average blood pressure
measurement and pulse will display separately
on the screen alternating repeatedly every 2-3
seconds, the A will remain on the display.
3. Press the
MEM
button again to scroll through all of
the measurements. Each measurement will indicate
the date and time taken, the measurement and
pulse reading, Hypertension Indicator results and
Irregular Heartbeat if present, Fig 3.
4. After you’ve scrolled through all the readings,
the display will cycle back to the first reading in
memory. Press
START
to turn the unit off.
When the number of readings exceeds 60, the oldest
data will be replaced with the new record.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
MEM
MEM
MEM
Summary of Contents for 01-539
Page 34: ......
