TUNE THE RECEIVER
Step 1 : Turn the Tuning Control (J)
until Tuning Indicator (G) lights steadily.
Note:
If the Tuning Indicator flashes, try fine-tuning. If the light still
flashes, check the transmitter settings to make sure the signal
is strong enough, as indicated by the steady flashing Audio Level
Indicator on the transmitter. As needed, adjust the transmitter.
MORE FINE-TUNING
If, after fine-tuning, interference in the form of static and/or "drop-outs"
can be heard, adjust Frequency Control (D) and re-tune receiver. (Step 3
above) If sound is distorted, slowly adjust the PC’s volume control to
compensate for a too-strong audio signal. If you are unable to achieve
clear sound, please refer to "Troubleshooting,” pages 8 and 9.
CONNECT THE TRANSMITTER
Connect the Matrix transmitter as follows:
Step 1 : Power the Transmitter
1. Insert power cord from 12V AC Adapter
(F) into the transmitter Power Input
Jack (B).
2. Plug AC Adapter (F) into any standard
wall outlet or surge protector.
Note:
There is no transmitter ON/OFF switch. The transmitter is designed
to be left plugged in and powered at all times. When the Matrix is
not in use for an extended period of time you may wish to unplug
the AC Adapter.
Step 2 : Connect to an Audio Source
Option 1 – Connect to a Computer/Soundcard
1. Connect Y-Adapter’s (M) male miniplug to
the audio/soundcard SPEAKER output (not
the line out).
2. Connect Audio Input Cable (C) miniplug
to one of the Y-Adapter’s (M) female
outputs.
3. Connect the PC speakers to the other
Y-Adapter’s (M) output.
FREQ.
ADJUST
DC 12V
Computer
FREQ.
ADJUST
DC 12V
DIRECT PLUG-IN
CLASS 2 TRANS
FORMER
1\P: 120V AC 60H
Z 5W
D/P 12V DC 150m
A
92
N5
LISTED
E100839
MODEL: 35-12-1
50C
E1A 172 9310 D
MADE IN CHIN
A
UL
LR 98553
FO
F
5
CONNECT THE RECEIVER
Connect the Matrix receiver as follows:
Step 1 : Power the Receiver
1. Insert power cord from the
6V AC Adapter (L) into the
receiver Power Input Jack (H).
2. Plug AC Adapter into any standard
wall outlet or surge protector.
Note:
There is no receiver ON/OFF switch. The receiver is designed to
be left plugged in and powered at all times. When the Matrix is not
in use for an extended period of time you may wish to unplug the
AC Adapter.
Step 2 : Connect to a Home Stereo System
1. Connect the Matrix receiver’s Audio Output Cable (I) to an available
input on your Home Stereo System (Video 1, Video 2, AUX, LD, DVD, etc).
2. Pivot the Receiver’s Antenna (K) to an upright, vertical position.
TUNING
CONTROL
DC 6V
DIRECT PLUG-IN
CLASS 2 TRANS
FORMER
1\P: 120V AC 60H
Z 5W
D/P 12V DC 150m
A
92N5
LISTED
E100839
MODEL: 35-12-1
50C
E1A 172 9310 D
MADE IN CHIN
A
UL
LR 98553
TUNING
CONTROL
DC 6V
Internet Audio Transmitter
Installation and Operation Manual
TABLE CONTENTS
Connect the Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Adjust the Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Connect the Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Tune the Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
More Helpful Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 & 9
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Specifications & Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back
INTRODUCTION
The Jensen Matrix allows you to listen to PC audio on your home stereo. The Matrix’s
900 MHz signals travel with ease through walls, floors, ceilings and other obstacles,
delivering high-quality stereo sound virtually anywhere in and around your home, up to
150 feet*.
The contents of this manual cover connection options and detailed operating procedures
for making the Jensen Matrix a valued part of your lifestyle. If, after having reviewed the
instructions you have any questions, please contact our Customer Service Department at
1-800-732-6866.
* Range may vary according to environment.
1
A u d i o
R e c e i v e r
TM
R
TUNING
CONTROL
DC 6V
2
A. Audio Level Indicator
B. Power Input Jack
C. Audio Input Cable (1/8" Miniplug)
D. Frequency Control
E. Transmitter Antenna
F. 12V AC Adapter for Transmitter
(3.5mm Barrel Plug)
G. Tuning Indicator
H. Power Input Jack
I.
Audio Output Cable (RCA Plugs)
J. Tuning Control
K. Receiver Antenna
L. 6V AC Adapter for Receiver
(2.5mm Barrel Plug)
M. 1/8” (3.5mm) Stereo Y-Adapter
A u d i o
T r a n s m i t t e r
TM
FREQ.
ADJUST
DC 12V
Transmitter
Receiver
A
C
B
B
M
C
F
D
G
E
F
L
K
H
M
I
J
3 4
ADJUST THE TRANSMITTER
Adjust the transmitter as follows:
Step 1 : Turn ON your Computer
so that you can hear sound coming from the source (CD-ROM,
Streaming Audio, etc).
Step 2 : Pivot the Transmitter’s Antenna (E)
to an upright, vertical position.
Step 3 : Set Transmitter level (PC Volume Control).
1. Set volume on the PC’s Volume Control to between half and three-
quarters.
2. Set the Frequency Control (D) to its midpoint. If Audio Level Indicator
(A) flickers intermittently, proceed to "Power the Receiver", page 5.
3. If the light does not flicker or is solid red adjust the PC’s Volume
Control up or down as necessary to make the Audio Level Indicator (A)
flicker intermittently.
FREQ.
ADJUST
DC 12V
6
H
L
G
J
D
A
IN
OUT
L
Antenna
Fuse
R
L
R
L
R
Tape
Mon 1
Tape
Mon 2
Spkr
A
Spkr
B
Phono
L
R
CD
L
R
L
Aux
300 75
TUNING
CONTROL
DC 6V
K
I
SMARTHOME™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #8226
