4
DE5457P
A.
Perform Steps A through C in Para. 3.2 above, until the
display reads:
E N R O L L W L D E V I C E
B.
Click <
NEXT
>. The display will read:
E N R O L L K E Y F O B
C.
Click <
OK
>. The display will read:
K e y f o b N o : _
D.
Suppose that the Keyfob you are about to enroll is to be
designated as Keyfob No. 5. Assuming that memory
location No. 5 is free - no keyfob has yet been enrolled
to it - click the <
5
> key. The display will change to:
K e y f o b N o : 5
The clear space at the far right tells you that the
memory location is free.
E.
Click <
OK
>. The display will prompt you to initiate a
transmission from the chosen wireless device:
T R A N S M I T N O W
F.
Initiate a transmission from the chosen keyfob by
pressing any one of its pushbuttons. In response, the
“Happy Tune” (- - - –––) will sound and the display will
change to:
K e y f o b N o : 5
A dark box will appear at the far right, indicating that
the chosen Keyfob has been enrolled as Keyfob No. 5.
Note:
If the same keyfob is already enrolled elsewhere,
the “Happy Tune” will sound twice in succession.
G.
From this point on, you may continue in several
different directions:
•
If you wish to enroll another keyfob, select
the desired number by:
-
Clicking <
NEXT
> to go up (6
%
7
%
8.....)
- Clicking <
BACK
> to go down (4
%
3
%
2....)
-
Clicking <
HOME
>
%
<
desired zone #
>
.
After that, proceed as in the example above.
•
To delete keyfob IDs, refer to Para. 3.4.
•
To return to the main menu, click
<
AWAY
>. This will bring back the display:
< O K > T O E X I T
You may now review and select any other
mode on the installer’s menu (by clicking
<
NEXT
> or <
BACK
>).
3.4 Deleting Device and Keyfob IDs
Occupied zones or keyfob memory locations must be
cleared (enrolled ID must be deleted) before enrolling a
new ID. To delete an existing ID, proceed as follows:
A .
Select the desired zone or memory location. If, for
example you selected
Zone No. 15
, or
keyfob No. 8,
the display will read:
Z o n e N o . 1 5
or, in the other case:
K e y f o b N o . 8
B.
Click <
OK
>. The display will change to:
< O F F > t o d e l e t e
C .
Click <
OFF
>
.
The display
will change to:
Z o n e N o . 1 5
or, in the other case:
K e y f o b N o . 8
Note that the dark box at the far right has disappeared.
It is now possible to enroll a new ID. It is also possible
to leave the cleared zone or memory location free, and
simply exit to the main menu.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #73902
