USER MANUAL
MOBILE GATEWAY 3.0
Gateway device with Internet connection
Support:
2 (4)
smartkitchen.solutions
helpdesk@ioliving.com
1/2022
Description of operation
The Mobile Gateway receives measurement data from SmartKitchen measurement devices via
Bluetooth and LoRa (also repeated) radios and transfers the measurement data to the SmartKitchen
cloud service via mobile network.
The device is meant to be powered from mains current, although it includes an internal rechargeable
battery, which keeps the device operating during the short power failures. The battery capacity is
enough to support about 30 hours of operation. If the device is disconnected from the mains, its
function changes after a certain time so that it transmits the measurement data received by the device
to the service once an hour. In this way, the battery and operating capacity of the device last longer, for
example during a power failure.
The device operation requires that it is located within the coverage area of the mobile network and
within the range of the measurement devices
’
data transfer signals.
The device scans and chooses the best available network operator during the startup.
The Mobile Gateway does not transfer stored measurement data from the measurement devices, like
other SmartKitchen Gateway devices do. If it is necessary to transfer the stored measurement data, it
can be done with an Android phone using ioLiving Handy application.
Internet connection
The Mobile Gateway includes a factory assembled international SIM card, and it does not have to be
connected to WiFi or LAN network. All the network parameters and settings are preset. The device
connects to 4G/LTE network and internet automatically. The SIM card can be removed or replaced only
by an authorized service.
The SIM card operates in following countries: Austria, Belgium, Denmark, Finland, France, Germany,
Hungary, Latvia, Netherlands, Norway, Poland, Slovakia, Spain, Sweden, and Switzerland. Other
countries are also possible.
Starting the use
The Mobile Gateway is activated by connecting the device to the mains and switching it on. At startup,
Mobile Gateway searches for available mobile networks and selects the best available. Scanning
usually takes a few minutes, depending on the quality of networks.
Functional check in the ioLiving service
Mobile Gateway must be activated in the SmartKitchen service:
→
Settings menu, under Gateway devices
The Mobile Gateway device is activated by adding its serial number to the service, giving the device a
nickname,
and selecting “
Activate
”. After
the activation, the data transfer device and its information is
displayed in the service.