32
Setting date:
After that, your device enters the date setting mode. Press the “M/
” button to
enter the current day (display shows “D”) and confirm with “Disp/ Set”. Proceed
accordingly for setting the month (display shows “M”) and year (display shows “Y”).
Always confirm with “Disp/ Set”.
Note:
In order to use wireless data transfer, date and time need to be set correctly.
Otherwise, measured data can not be assigned accordingly.
ANT settings:
ANT is a wireless data transfer standard. In order to use it, transmitting- and receiving
device must be equipped with a specific module. Your
smartLAB
®
walk
P+
step counter
has an integrated ANT module, making it possible to transfer measured data to a PC,
laptop or a mobile phone (e.g. the HMM
h
Fon
plus). You can store, analyse and process
the data with the accordant telemedicine software on these receiving devices.
You have 2 different ANT setting modes:
