40
Locking your device:
If no button is pushed for 30 seconds, your
smartLAB
®
walk
P+
automatically activates
key lock. This is shown by the according display symbol. By pushing the „Disp/ Set“
button, you can unlock the device.
Display-power-off:
When you are in user mode, your device automatically turns off after 1 minutes of
non-use. To turn it back on, click on the „Disp/Set“ button.
Maintenance
• Do not dump the device or use force while operating it
• Avoid exposing the device to high temperatures or direct sunlight.
• Do not immerse in water, since this might cause irreparable damage.
• Let the device acclimate after having stored it in a temperature close to zero. Do
not immediately use it in such a condition.
• Do not try to disassemble the device.
• If you do not use the device for a longer time, please take out the batteries.
