OM_Axessor_CIT_V024_20170518_EN.pdf Operating
Manual
Page 52
Subject to change without prior notice
Axessor CIT
The lock opens.
6. Open
the
safe.
7. If desired continue in Programming Mode (
Programming Mode on
page 54
).
Note!
The programming mode is available in bank mode and mixed mode only
.
5.10.3 Opening procedure in OTC mode
The display switches off automatically after 1 minute without any key be-
ing pressed.
1. Press any key to wake up the display (if necessary).The lock status ap-
pears.
2. Key-in the 4 digit ID (e.g. 3512) using the
<NUMERIC>
keys (an asterisk
appears for every digit entered).
Press the <ENTER> key twice
to con-
firm the ID (pressing the
<ENTER> key once
triggers a duress alarm).
3. Key-in the Opening Code received from the dispatch centre (e.g.
123456) using the
<NUMERIC>
keys.
Press the <ENTER> key twice
to
confirm the Code (pressing the
<ENTER> key once
triggers a duress
alarm).
4. If an opening code with time delay is defined the opening delay window
appears and the set delay time starts to count. Every 60 seconds a
beep sounds while the delay time counts. If the timer has elapsed an-
other beep indicates the end of the opening delay.
Summary of Contents for Axessor CIT
Page 1: ......
