Operating Manual
OM_Axessor_CIT_V024_20170518_EN.pdf
Subject to change without prior notice
Page 63
Axessor CIT
6.4.2.2 Configuring Weekly Locking Periods - Submenu WEEKLY
Up to 35 weekly repeated time windows can be defined, during which the
lock cannot be opened (e.g. outside business opening hours).
Authorization: Master
Code
6.4.2.2.1 Adding a Weekly Locking Period
1. Select submenu „WEEKLY“.
2. Press
the
<ENTER>
key. If any Weekly Locking Periods are already
defined, the count is displayed.
3. Press
the
<ENTER>
key to enter a new period.
4. Use
the
<LEFT>
or
<RIGHT>
key to set the day and the time of the
starting point of the Locking Period
(indicated by the „
lock closed
”
symbol) and the
<ENTER>
key for confirmation.
5. Confirm with the
<ENTER>
key.
Note!
If the maximum of 35 Weekly Locking Periods are already defi ned upon press-
ing the „ENTER“ key the display does not change / react.
Note!
Time and day entry depend on the AM/PM setting (
Setting the time format -
submenu AM/PM on page 61).
If time format is set to 12-hours (AM/PM On) the week days are numbered:
Sunday= 1, Monday= 2, ... Saturday= 7;
If time format is set to 24-hours (AM/PM Off) the week days are numbered:
Monday= 1, Tuesday= 2, … Sunday= 7.
Summary of Contents for Axessor CIT
Page 1: ......
