Operating Manual
OM_Axessor_CIT_V024_20170518_EN.pdf
Subject to change without prior notice
Page 77
Axessor CIT
2. Press
the
<ENTER>
key. The currently bolt open time is displayed
(minutes:seconds).
3. Use
the
<LEFT>
or
<RIGHT>
key to set the desired window to enter the
second opening code (setting range „00:00“ to „02:30“).
Note!
• Upon delivery the bolt open time is set to 6 seconds.
4. In the upcoming dialogue select „
YES
“ using the
<LEFT>
or
<RIGHT>
key, then press the
<ENTER>
key to confirm.
6.4.3.7 Configuring the Bolt Open Time for CIT mode - Submenu
BLT OPN cit
Upon opening of the lock in CIT or OTC mode it will close automatically
when the bolt open time has elapsed. The automatic closing can be pre-
vented by connecting a door open contact or bolt work open contact (
Lock Input 2 on page 28
).
Authorization:
Master Code
1. Select the submenu „
BLT OPN cit
“.
2. Press
the
<ENTER>
key. The currently bolt open time is displayed
(minutes:seconds).
3. Use
the
<LEFT>
or
<RIGHT>
key to set the desired window to enter the
second opening code (setting range „00:00“ to „02:30“).
Note!
• Upon delivery the bolt open time is set to 6 seconds.
4. In the upcoming dialogue select „
YES
“ using the
<LEFT>
or
<RIGHT>
key, then press the
<ENTER>
key to confirm.
Summary of Contents for Axessor CIT
Page 1: ......
