OM_Axessor_CIT_V024_20170518_EN.pdf Operating
Manual
Page 90
Subject to change without prior notice
Axessor CIT
3. Select either „
ON
“ or „
OFF
“ by toggling with the
<LEFT>
or
<RIGHT>
key, then press the
<ENTER>
key to confirm.
4. In the upcoming dialogue select „
YES
“ using the
<LEFT>
or
<RIGHT>
key, then press the
<ENTER>
key to confirm.
6.4.5.5 Enabling/disabling Confirmation Window Beeper - Sub-
menu CNF WIN beep
This setting defines, if Confirmation Window active (waiting for confir-
mation code after elapse of Time Delay) period is indicated with 3 beeps
every 60 seconds.
Authorization: Master Code
1. Select submenu „
CNF WIN beep
“.
2. Press
the
<ENTER>
key. The information if the beeper is switched on or
off is displayed.
3. Select either „
ON
“ or „
OFF
“ by toggling with the
<LEFT>
or
<RIGHT>
key, then press the
<ENTER>
key to confirm.
4. In the upcoming dialogue select „
YES
“ using the
<LEFT>
or
<RIGHT>
key, then press the
<ENTER>
key to confirm.
6.4.5.6 Enabling/disabling Delay Notify Beeper - Submenu DELAY
beep
This setting defines, if the opening delay period is indicated with 1 beep
every 60 seconds.
Authorization: Master Code
1. Select submenu „
DELAY beep
“.
2. Press
the
<ENTER>
key. The information if the beeper is switched on or
off is displayed.
3. Select either „
ON
“ or „
OFF
“ by toggling with the
<LEFT>
or
<RIGHT>
key, then press the
<ENTER>
key to confirm.
Summary of Contents for Axessor CIT
Page 1: ......
