Scanning procedure
44
For details, such as in interdental spaces, please remove all teeth that impair the sensor's
view of the area to be closed, e.g. directly adjacent teeth and segments that are not
required for the scan.
After completing the scan and cutting the data set to size, you need to perform a matching.
To do this, click on the following icon:
Figure 45: "matching" process
The recorded individual measurements are automatically added together by special
algorithms, and an STL is created. This process is known as matching. You can set the
quality of the STL under
Item 13.4
.
After matching the records, the completed data set is reloaded into the 3D viewer. If more areas are
missing, the rescan mode can be repeated on the STL data set.
To remove superfluous areas on the model, you can now cut the data set to size with the following
tool.
Cut data inside the selection
Cut data outside the selection
Undo the last cutting action
Select a cut function and click with the left mouse button around the required area. In this way, you
select the area on and around the model.
To complete the process, make the last selection with the right mouse button.
The model has been cut to size and can be reset with the
"Undo cut function"
icon.
