Smartplanet PretzelDogsOn-A-Stick Make SPM-3, Instructions Manual

HOW TO OPERATE

1. Before first use, wipe down all surfaces with a dry, non-
abrasive cloth.

2. Find a dry, suitable, level surface near an electrical outlet.

3. The Cooking Plates should be lightly coated with a small 
amount of vegetable oil. Vegetable oil can be applied with 
a paper towel or with a nonstick oil spray. The oil will help 
protect the nonstick quality of the cooking surface. This should 
be done periodically to maintain the nonstick quality.

4. Preheat the appliance by closing the lid and plugging into an 
electrical outlet.

5. When the power is on, the Red Indicator Light will come on. 
The Red indicator Light will stay on while the appliances is 
preheating.

6. The appliance should preheat for a minimum of 5 minutes. 
The Red Indicator Light will turn off when the appliance is 
ready to cook. 

7. At this time you may prepare the soft pretzel dough.

8. Roll the dough out onto a floured surface, ensure that it is 
thick enough to fill the cavity of the PretzelDog Maker. You may 
need to periodically sprinkle the dough with flour or cornmeal 
to ensure that the dough does not get too sticky.

9. Cut the dough into 3½ x 1’’ ropes, two for each Soft  
Pretzel Dog molds. Apply any ingredient as it is stated within 
the recipe section.

10. Carefully place the dough onto each individual Cooking 
Plates.

11. Close the Lid and make sure Lid is locked by closing latch. 
Plug in the appliance.

7