6. Install the filter pad and filter box cover. It should snap closed.
Fig. 10
Fig. 10
7. Choose a fountain head for the desired water effect, and assemble
your choice as shown in Fig. 11.
Fig. 11
8. Place the lights in or out of the water. Make sure that the sensor is
NOT submerged. Make sure that the light sensor faces up.
Fig. 12
NOTE: At night, the lights will automatically turn on.
At sunrise, they will automatically turn off.
Fig. 12
9. Place the filter assembly into the pond and connect to a proper
power source. Fig. 13
Fig. 13
GFCI
Filter box cover
Filter pad
I
H
H
H
L
K
L
J
Sensor
(Must face up)
PLEASE CALL 1-888-755-4497 BEFORE RETURNING TO THE STORE.
WWW.SMART-POND.COM
