background image

TRANSFORMER-BASED FILTER (TBF™) SERIES 

Considered to be one of the most significant developments in the power protection industry. TBF™ 
Filters contain innovative technology that combines Surge Suppression and Noise Isolation which 
filters the noise on the ground to less than 0.5 Volts (US Patent # 6229682). Exclusive "POVP" 
Prolonged Over Voltage Protector (US Patent # 6560086) disconnects the output power if voltage 
exceeds 155 volts. Exclusive Smart Technology (US Patent #5721661) protects microprocessor 
based equipment against reverse polarity or no ground. The patented TBF™ filters prevent 90% of 
the power problems experienced by your POS system, computer, copier and facsimile machine.

UNINTERRUPTIBLE POWER SUPPLIES - UPS SERIES

Smart Power Systems' Uninterruptible Power Supplies (UPS) with integrated TBF™ 
Technology provide on-line power conditioning.

DATA LINE AND SIGNAL PROTECTOR

Smart Power Systems offers the revolutionary SmartNet II to provide data line and signal 
protection for phones, networks, TVs and security systems.

OTHER POWER PROTECTION PRODUCTS

WARRANTY

Limited Lifetime Warranty

All 

Smart Cord

 Filters Series are guaranteed free of defects in material or workmanship for the 

life to the original purchaser --or, they will be repaired or replaced free of charge. See our website
for more details -  www.smartpowersystems.com

IMPORTANT

If for any reason you need to return the 

Smart Cord

 unit to the manufacturer, you 

should obtain an RMA (Return Material Authorization) number before returning the unit. 
To request an RMA number please call 1-800-772-7633 or visit the website at 
www.smartpowersystems.com/main/rma.htm

UL 1449 

3rd. Edition

 Listed

If you have any questions call us at our Tech Support line toll free 
1-800-772-7633 or email us at support@smartpowersystems.com

7409 Railhead Lane  -  Houston, Texas 77086  -  Tel:(713)464-8000  -  Fax:(713)984-0841
E-mail: support@smartpowersystems.com  -  www.smartpowersystems.com  

If  the  Smart Power Systems equipment fails and  this failure allows a  surge to  pass through and 
damage the connected equipment, Smart Power Systems

 

will pay for the repair or replacement of 

the connected equipment of the original purchaser . Please take the time to 

register

 each Smart 

Power  Systems'  product  along  with  the  connected  equipment  devices  connected  to  it  within  10 
days of date of purchase in order for you to take advantage of this product warranty and connected 
equipment protection policy. See our website for more details - www.smartpowersystems.com

$25,000 Connected Equipment Warranty

Summary of Contents for Smart Cord Plus

Page 1: ... and manufacturing the highest performance power protection and filtration devices for your electronic equipment Proper use of this device will provide the protectionneededforyourconnectedequipment Smart Cord Equipped with Smart Ground 16001070 Rev 03 22 WITH SMART GROUND Network Protection ELECTRONIC POWER CONDITIONER Smart Cord ...

Page 2: ...g the unit will void your warranty This device features an internal protection that will disconnect the surge protective component at the end of its useful life but will maintain power to the load now unprotected If this situation is undesirable for the application follow the manufacturer s instructions for replacing the device Do not install this device if there is not at least 10 meters 30 feet ...

Page 3: ...ls only 4 Plug Smart Cord unit into grounded wall outlet 5 Your equipment is now fully protected Place the Smart Cord where monitoring lights can be observed NEMA 5 15 Outlets 3 NEMA 5 15 Outlet Wall Outlet Wall Outlet TBF Power Cord TBF Power Cord UTBFxxSG 175 UTBFxxSG 120 UTBF07SG 110 IMPORTANT The Smart Cord is designed to be compatible with a GFCI Ground Fault Circuit Interrupter however durin...

Page 4: ...terial or workmanship for the life to the original purchaser or they will be repaired or replaced free of charge See our website for more details www smartpowersystems com IMPORTANT If for any reason you need to return the Smart Cord unit to the manufacturer you should obtain an RMA Return Material Authorization number before returning the unit To request an RMA number please call 1 800 772 7633 o...

Reviews: