SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014
80
The individual fields on this screen are defined as follows:
Field Name
Description
Enable WPS
[Enabled, Disabled] Enables Wi-Fi Protected Setup.
Enter STA PIN
Use AP PIN
Select the method [STA PIN, AP PIN] for how the WPS PIN is generated. Select the desired radio button then click
the
Add Enrollee
button if necessary to add a specific, enrollee station.
If both the
PIN
field and
Set Authorized Station MAC
are left blank, the
PBC
(push-button) mode is automatically
made active.
Set Authorized Station
MAC
When manually pairing via WPS, enter the MAC address of the client device you are trying to connect.
Set WPS AP Mode
[Configured, Unconfigured] Select Configured to have the gateway assign security settings to clients. Select
Unconfigured when you wish to have an external client assign security settings to your SmartRG gateway.
Device PIN
(Auto generated by the access point.)
Network Authentication
Select the desired network security authentication type.
Note that many of the fields in the Manual Setup portion of the screen vary based on the choice of Network Authentication.
Each variation is presented below.