User Manual
8
The access point can be placed on a shelf or desktop, ideally you should be able to
see the LED indicators in the front, as you may need to view them for troubleshooting.
Designed to go up to 100 meters indoors and up to 300 meters outdoors, wireless
LAN lets you access your network from anywhere you want. However, the numbers of
walls, ceilings, or other objects that the wireless signals must pass through limit signal
range. Typical ranges vary depending on types of materials and background RF
noise in your home or business.
3.2.2 Connecting the Device
Step 1
Connect the
DSL
port of the router and the Modem port of the splitter
with a telephone cable; connect the phone to the phone port of the
splitter through a cable; and connect the incoming line to the Line port of
the splitter.
The spliiter has three ports:
Line
: Connect to a wall phone jack (RJ-11 jack)
Modem
: Connect to the Line interface of the router
Phone
: Connect to a telephone set
Step 2
Connect the
LAN
port of the router to the network card of the PC through
an Ethernet cable.
Step 3
Plug the power adapter to the wall outlet and then connect the other end
of it to the
Power
port of the router.
Note:
If you use 3G WAN service, connect the 3G USB data card to the
USB
port of
the router.
The followig figure displays the connection of the DSL router, PC, and telephones.
Summary of Contents for SR360n
