SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018
147
Field Name
Description
STUN Server Address
Enter the physical STUN server’s assigned network address. An invalid address will produce an imme-
diate on-page error message from the gateway. You can enter a maximum of 256 characters
An ACS server may also have STUN functionality running on the same physical box. Consult your ACS
vendor for implementation options and also TR-069 protocol documentation, if necessary.
STUN Server Port
Enter the port number associated with your STUN server infrastructure. Options are
0
-
64435
. The
default is
3478
.
STUN Server User Name Enter the username by which the gateway accesses the STUN infrastructure. Maximum length is 256
characters. Special characters are accepted.
STUN Server Password
Enter the password by which the modem authenticates the above username to the STUN infra-
structure. Maximum length is 256 characters. Special characters are accepted. The value will be hid-
den.
STUN Server Maximum
Keep Alive Period *
Enter the maximum time( in seconds) that the keepalive function should be active. Options are
0
-
Unlimited. The default is
-1
(no maximum limit).
STUN Server Minimum
Keep Alive Period *
Enter the minimum time( in seconds) that the keepalive function should be active. Options are
0
-
Unlimited. The default is
0
seconds.
* This mechanism is used for refreshing NAT bindings with using Restricted Cone NAT or Port Restricted Cone NAT. A device’s
internal address / port mappings (which the STUN protocol can use) can have keep alive values attributed. These minimum and
maximum keep alive times define the minimum time to retain the mapping information that STUN has discovered, and the max-
imum time to retain that information, before refreshing it through forced re-discovery.
With these NAT schemes, the initial network address translation may not be used after a specified elapsed time. Internal map-
ping is dropped. The gateway then assigns a different address mapping. This mechanism allows for coordinated refresh on the
bindings for mappings used by the STUN protocol. For further information, review STUN-related RFCs.
Selecting appropriate values for these two fields is influenced by a various environmental factors including device types
deployed, services employed and NAT configuration options enabled within the topology.
XMPP Connection
On this page, you can configure a connection between the gateway and an XMPP server.
