background image

The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to a

telephone interface. The termination of an interface may consist of any combination of devices subject only to the

requirement that the sum of the RENs of all the devices not exceed five.

L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être

raccordés à une interface téléphonique. La terminaison d'une interface peut consister en une combinaison

quelconque de dispositifs, à la seule condition que la somme d'indices d'équivalence de la sonnerie de tous les

dispositifs n'excède pas 5.

Notice:

The Ringer Equivalency Number (REN) assigned to each terminal device provides an indication of the

maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface

may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence

Numbers of all the devices does not exceed 5.

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that

temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company

will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if

you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect

the operation of the equipment. If this happens the telephone company will provide advance notice in order for

you to make necessary modifications to maintain uninterrupted service.

Summary of Contents for SR570ac



















Reviews: